Siemens SITRANS LCS100 Fixed Rod Capacitance Point Level Switch
$500+ Orders on Lesman.com Ship Free via UPS Ground
Fixed rod capacitance point level switch for level and material detection in interfaces, solids, liquids, slurries, and foam. Rod extension lengths from 11.81" (300 mm) to 157.48" (4000 mm). Stainless steel process connection, thermostatic polyester enclosure. Available in 2-wire (8/16 or 4-20 mA), 4-wire relay or transistor, or 3/4-wire with IO-Link, PNP, NPN, Push/Pull versions. For media with minimum dielectric constant 1.5.
LCS100 is also available in compact plastic, compact stainless steel, or cable extension versions.
SITRANS LCS100 is a direct replacement for the Pointek CLS100 level switch.
Siemens SITRANS LCS100 is a fixed rod capacitance switch for level detection of conductive and non-conductive interfaces, solids, liquids, slurries and foam. Superior level detection performance due to the inverse frequency shift capacitance technology which is extremely sensitive to capacitance changes.
The CLS100 capacitance switch comes standard with a two-wire mA and relay output, IO-link communications optional. The rod extensions are availale in fixed and custom lengths from 11.81" (300 mm) to 157.48" (4000 mm).
- For use in liquid and solid applications such as overflow, high, low and demand applications, and pump protection
- High sensitivity, inverse frequency shift capacitance switch
- Sensitivity setting by IO-Link or by potentiometer (configurable)
-
Interface detection (for example, oil/water or foam/liquid)
-
Active shield technology for material build-up compensation
- Good for high/low point level monitoring in tanks with process temperatures to 257° F (125° C)
- Choice of PPS or PVDF sensor
- Can be mounted vertically or angled
- LED indicators on or in enclosure show sensor status, output status, and power
- CE, CSA, FM, ATEX approvals available
| Point or Continuous Level | Point |
|---|---|
| Level Media | Liquid, Slurry, Interface, Dry Solid |
| Level Technology | Capacitance |
| Measuring Range | 11.81" (300 mm) to 157.48" (4000 mm) Insertion |
| Wetted Materials | PPS or PVDF PEEK Probe |
To build your complete part number, make a selection from each table section below. Your completed model and its price will appear in the Results section. If you don't see the options you need, call us.
Results
| Please complete your model selections. |