Siemens SITRANS LCS100 Cable Extension Capacitance Point Level Switch

Prices starting at:
$519.00

$500+ Orders on Lesman.com Ship Free via UPS Ground

Call for Availability
SKU
7ML703

Cable extension capacitance point level switch for level and material detection in interfaces, solids, liquids, slurries, and foam. Cable extension lengths from 19.69" (500 mm) to 787.40" (20000 mm). PPS process connection, FEP cable extension, thermostatic polyester enclosure. 2-wire (8/16 or 4-20 mA) or 4-wire relay or transistor. For media with minimum dielectric constant 1.5.

LCS100 is also available in compact plastic, compact stainless steel, or fixed rod versions.

SITRANS LCS100 is a direct replacement for the Pointek CLS100 level switch.

Territory Restriction: Due to our territory agreement with Siemens, Lesman is the authorized Siemens sales representative in Illinois, Indiana, Wisconsin, Eastern Missouri, Michigan's Upper Peninsula, Paducah KY area, Oregon, Washington, Northern Idaho, Western Montana, Alaska, and Hawaii. If you are outside that area, you can find your local sales office or get technical assistance by calling 800-365-8766 or 972-522-4500, or sending an email to piabusales.industry@siemens.com.

Siemens SITRANS LCS100 is a extended cable capacitance switch for level detection of conductive and non-conductive interfaces, solids, liquids, slurries and foam. Superior level detection performance due to the inverse frequency shift capacitance technology which is extremely sensitive to capacitance changes.

The CLS100 capacitance switch comes standard with a two-wire mA and relay output. The cable extensions are availale in fixed and custom lengths from 19.69" (500 mm) to 787.40" (20000 mm).

  • For use in liquid and solid applications such as overflow, high, low and demand applications, and pump protection
  • High sensitivity, inverse frequency shift capacitance switch
  • Interface detection (for example, oil/water or foam/liquid)
  • Active shield technology for material build-up compensation

  • Good for high/low point level monitoring in tanks with process temperatures to 257° F (125° C)
  • PPS, FEP Extension Cable, PPS Extension Cable Fixing
  • Vertical mounting only
  • LED indicators on or in enclosure show sensor status, output status, and power
  • CE, CSA, FM, ATEX approvals available

Supported by

Siemens Advantage Plus

 

Need technical help?
Visit the Siemens USA Support center.

More Information
Point or Continuous Level Point
Level Media Liquid, Slurry, Interface, Dry Solid
Level Technology Capacitance
Measuring Range 19.69" (500 mm) to 787.40" (20000 mm) extension
Wetted Materials PPS

To build your complete part number, make a selection from each table section below. Your completed model and its price will appear in the Results section. If you don't see the options you need, call us.

                  Results

                  Please complete your model selections.
                  Copyright 1995-2023 © Kele Industrial Automation (Lesman and A-Tech Inc)