Panametrics PanaFlow XMT1000 Ultrasonic Liquid Flow Transmitter
Call for Pricing
Call for Availability
SKU
XMT1000
Ultrasonic liquid flow transmitter that can be installed remotely or right at the process measurement point, for accurate and reliable volumetric flow, mass flow, flow velocity, and totalized flow measurement using wetted or clamp-on transducers. For acoustically conductive fluids, including most clean liquids and liquids with entrained solids or gas bubbles. Fits pipe sizes from 0.5" to 84". Capable of logging up to 10,000 flow data points with up to 26 parameters per point.
Territory Restriction:
Lesman is the authorized distributor for Panametrics flowmeters, humidity, dewpoint, and moisture analyzers, plus gas measurement and analytics instrumentation in Wisconsin, Northern Illinois, Northern Indiana, Oregon, and Southwest Washington.
Suitable for measuring flow of hydrocarbon liquids; crude, lubricating, or dieself fuel oils; solvents, liquified natural gas (LNG); water, wastewater, distilled water, hot or chilled water; chemicals; or beverages.
- For 0.5 to 84" pipe sizes standard; Consult factory for pipes larger than 84"
- Compatible with Panametrics C-RS, CF, C-PT, and C-ET series wetted and clamp-on ultrasonic flow transducers
- One, two, or three channels/measurement paths
- Bidirectional range –40 to 40 ft/s (–12.2 to 12.2 m/s)
- 400:1 turndown ratio
- Repeatability ±0.1% to 0.3% of reading
- One 4 to 20 mA isolated output (NAMUR NE43-compliant), and one pulse or frequency output standard; Optional 4-20 mA outputs, 4-20 mA isolated inputs, and RTD temperature inputs
- Approvals: Class I, Div 1, Gr B-D; Class I, Zone 1, Ex d IIC T6; Class I, Div 2, Gr A-D; Class I, Zone 2, Ex nA IIC; ATEX/IECEx: Ex d IIC T6 FISCO outputs; Ta = -40°C to +60°C, Type 4X
- RS-485 Modbus interface standard, HART 7.0, Foundation Fieldbus optional
- Powder-coated aluminum or stainless steel enclosure with LCD display and built-in magnetic keypad
- SIL configuration available
- Compatible with PanaView Plus software
| HART | Yes |
|---|---|
| SIL-Rated | Yes |
| Flow Technology | Ultrasonic |
| Measuring Range | –40 to 40 ft/s (–12.2 to 12.2 m/s) bidirectional |