Eurotherm EPC3000 Programmable Single Loop PID Controllers

Prices starting at:

$554.00

$500+ Orders on Lesman.com Ship Free via UPS Ground

Call for Availability

SKU

EPC3000

Eurothern's EPC3000 programmable single loop process and temperature controllers deliver fast acting and repeatable control. They come standard with Ethernet connectivity providing fast access to process and diagnostic information as well as connectivity to external PLCs, SCADA systems, and IIoT designs. They are certified to meet the stringent cybersecurity requirements of Achilles® Communications Robustness Testing Level 1. Available in 1/4 DIN, 1/8 DIN, and 1/16 DIN cutouts with multiline digital displays and front-panel programming buttons.

Process inputs are fast and accurate, with exceptional thermal stability, aiding precise and consistent control over long periods without calibration drift. Recalibration and user calibration correction functions are available to further improve accuracy.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Full Description

Display Type High Visibility LCD three color multifunction display, 3008/3004 4.5,5 Digit PV, 2 starburst, 3016 4 Digit PV, 1 starburst
Safety-approvals Achilles CRT Level 1 Cybersecurity, EN13849 PLc, EN14597 TR, Factory Mutual (FM) approved
Input Type TC, PT100/PT1000 RTD, mV, mA, Zirconia
PV Accuracy <0.1% low thermal drift
Control Types On/Off, PID, VP, Carbon Potential
Special Features Application Templates, Atmosphere Control, Gain Scheduling, Maths and Totalizer Function, Native Ethernet, Recipes, Text Messaging, Dual input control
SP Programmer Up to 20 programmes of 8 segments or 10 programmes of 24 segments
Analogue IP/OP 3008/3004: 2PV, 1CT, 3 Isolated DC OP, 3016: 1PV, 1CT, 1 Aux (RSP), 2 Isolated DC OP, In 4, Out 3
Digital IP/OP 8 (max) Open Collector DIO 3008/3004, In 5, Out 4
Digital Comms BACNet, EIA-485, EtherNet/IP, Modbus RTU, Modbus TCP
Alarm Types Hi, Lo, Dev, Sensor fault, Heater fail, Rate of Change, Event

Model Selection Guide

Make one selection from each table section below. Follow the arrows down to make sure the option you want is available. A complete model number could look like this: EPC3004/CC/VH/XX/XX/XX/XX/XX/XX/XX/XX/XXX/ST/XXXXX/XXXXXX/XX/X/X/X/X/X/X/X/X/X/X/XX/XX/XX.

EPC3016: Includes one Universal PV Input and one Form C Relay. EPC3008/3004: I/O supplied as standard includes one Universal PV Input, EIA-485 Modbus RTU Slave Communications, 1 Form C Relay, 2x Contact Closure Digital Inputs, 1 Current Transformer Input, and 24Vdc Transmitter Power Supply.

Don't see what you need? Call our factory automation specialists at 800-225-6102.

Description		Catalog Number	Availability
Controller Model	1/4 DIN Controller, EPC3004	EPC3004	↓
	1/8 DIN Controller, EPC3008	EPC3008		↓
	1/16 DIN Controller, EPC3016	EPC3016			↓
Type	Controller only	CC	●	●	●
	1 X 8 Segment Basic Programmer	CP	●	●	●
	1 X 24 Segment Advanced Programmer	P1	●	●	●
	FM Alarm Unit	FM	●	●	●
Supply Voltage	100-230 VAC	VH	●	●	●
Supply Voltage	24VAC/24 VDC	VL	●	●	●
I/O 1	Not Fitted	XX	●	●	●
	Relay Output (without snubber)	R1	●	●	●
	DC Output	D1	●	●	●
	Triac (without snubber)	T1	●	●	●
I/O 2	Not Fitted	XX	●	●	●
	Relay Output (without snubber)	R1	●	●	●
	DC Output	D1	●	●	●
	Triac (without snubber)	T1	●	●	●
I/O 4	Not Fitted	XX	●	●	●
	Relay Output (without snubber)	R1	●	●
	DC Output	D1	●	●
	Triac (without snubber)	T1	●	●
Output 3	Form C (Default)	XX	●	●	●
Serial Communications	ModBUS slave (Default)	XX	●	●	●
	ElBiSync Enabled	EI	●	●	●
	Modbus Master	SM	●	●	●
Ethernet, 2nd Input, I/O Options	None (Default)	XX	●	●	●
Ethernet, 2nd Input, I/O Options	Second PV Input, 8 Digital Input/Outputs	I8	●	●
Ethernet TCP Protocol	Ethernet (Modbus TCP Slave) 4 X Digital I/O Only	E4
	Modbus TCP Slave or None	XX	●	●	●
	Ethernet/IP Server	ES	●	●	●
Tool Kit Blocks	None (Default)	XX	●	●	●
Tool Kit Blocks	Standard	TK	●	●	●
OEM Security	None	XXX	●	●	●
OEM Security	OEM Security	OEM	●	●	●
Bezel	Standard IP65/NEMA 12	ST	●	●	●
Bezel	Washdown IP66/NEMA 4X (Indoor Use)	WD	●	●	●
Labels	XXXXX	XXXXX	●	●	●
Specials	XXXXXX	XXXXXX	●	●	●
Gain Scheduling Sets	Two Gain Scheduling Sets (Standard)	XX	●	●	●
Gain Scheduling Sets	Eight Gain Scheduling sets	08	●	●	●
Application	Heat Only (default)	1	●	●	●
	Heat/Cool	2	●	●	●
	FM High Limit	H	●	●	●
Input 1 Sensor Type	Linear 0-10VDC	V	●	●	●
	Linear 4-20mA	4	●	●	●
	Type J Thermocouple	J	●	●	●
	Type K Thermocouple	K	●	●	●
	PT100 RTD	P	●	●	●
	PT1000 RTD	W	●	●	●
Input Range 1	Full Range	F	●	●	●
Input 2 Sensor Type	Not Fitted	X	●	●	●
	Type J Thermocouple	J	●	●
	Type K Thermocouple	K	●	●
Input Range 2	Not Fitted	X	●	●	●
Input Range 2	Full Range	F	●	●
Current Input Range	Not Used	X	●	●	●
	10A	1	●	●	●
	50A	5	●	●	●
	100A	6	●	●	●
Digital Input A Function	Not Used	X	●	●	●
	Auto/Manual	M	●	●	●
	Local Setpoint Select	P	●	●	●
	Remote Setpoint Select	U	●	●	●
Digital Input B Function	Not Used (EPC3004/EPC3008)	X	●	●
	Not Used (EPC3016)	XX			●
	Auto/Manual	M	●	●
Programmer I/O Config	Not Used/Fitted (EPC3004/EPC3008)	X	●	●
Programmer I/O Config	Not Used/Fitted (EPC3016)	XX			●
Units	Degrees Fahrenheit	F	●	●	●
Future	Future	XX	●	●	●
Warranty	Standard Warranty	XX	●	●	●
Certificate of Conformity	None Required	XX	●	●	●

Product Documentation