Bellofram Type 1000 I/P Transducers

Bellofram's Type 1000 transducer reduces a supply pressure to a regulated output pressure proportional to the electrical input. The T1000 accepts a wide range of pressures, from 3 PSIG above maximum output to 100 PSIG. An integral volume booster provides high flow capacity (to 12 SCFM).

Models are available in general purpose, NEMA 4X, extended range, high relief, intrinsically safe, and explosion proof constructions. Type 1000 I/P transducers can be pipe-, panel-, or bracket-mounted in any position. All Type 1000 transducers are factory-calibrated for direct acting operation, but can be switched to reverse acting, to provide a minimum of their full rated output pressure at input signal failure.

Key Specifications

  • Light weight, mounts at any angle
  • Low air consumption
  • Wide supply pressure range, with low supply pressure sensitivity
  • General service models have external zero and span adjustments
  • Built-in volume booster
  • General purpose 3-15 PSIG model can be recalibrated to 3-9 PSIG or 9-15 PSIG for split-ranging applications. This model normally available from Lesman stock.

Specifications, Manuals, and Supporting Literature

Click the file icon to view the file online, or right-click on the file icon and select "Save Target As..." to download the file to your computer for later viewing.
Tip: If you want to print a large file, download it to your PC first.

    • Lesman Catalog Section: Process Control Accessories
    • 2.7MB
    • Lesman Catalog Section: Process Control Accessories
    • Bellofram Type 1000 I-P and E-P Transducers Specification Datasheet
    • 516KB
    • Bellofram Type 1000 I-P and E-P Transducers Specification Datasheet
    • Bellofram Type 1000 I-P and E-P Transducers Installation Instructions
    • 516KB
    • Bellofram Type 1000 I-P and E-P Transducers Installation Instructions

Model Selection Guide

Use this table to find the right model for your application. Click the model number to order in our secure online store. If the model or range you need isn't listed here. Call Lesman at 800-953-7626.

Input SignalPneumatic PortElectrical PortEnclosure Rating/
Approval
Output RangeCatalog Number
4-20 mA 1/4" NPT 1/2" NPTGeneral Purpose3-15 PSI
9-15 PSI
3-27 PSI
6-30 PSI
961-070-000
961-073-000
961-074-000
961-075-000
NEMA 4X3-15 PSI
9-15 PSI
3-27 PSI
6-30 PSI
961-070-004
961-073-004
961-074-004
961-075-004
FM Intrinsically Safe3-15 PSI
3-27 PSI
961-099-000
961-100-000
FM Explosion-Proof3-15 PSI 961-098-000

 

Accessories

Call Lesman at 800-953-7626 for accessories, parts, or repair kits for your Bellofram I/P transducers.

  • Valve mounting kits
  • 2" pipe mounting kits