Siemens SITRANS FM MAG6000 Magnetic Flow Transmitter (Accuracy 0.2%)

Prices starting at:
$1,699.00
Call for Availability
SKU
7ME6920

Field- or rack-mount transmitter for use with Siemens SITRANS FM flow sensors. 0.2% ±1 mm/s max measuring error. IP67/NEMA 4X/6 field enclosure or IP20/NEMA 1 rack-mount enclosure. 1 each: current, digital, and relay outputs plus batch control functionality. CE, UL, FM, CSA approvals. Rated for operating temperatures -4° to 140° F (-20° to 60° C).

Territory Restriction: Due to our territory agreement with Siemens, Lesman is the authorized Siemens sales representative in Illinois, Indiana, Wisconsin, Eastern Missouri, Michigan's Upper Peninsula, and the Paducah, KY area. If you are outside that area, you can find your local sales office or get technical assistance by calling 800-365-8766 or 972-522-4500, or sending an email to piabusales.industry@siemens.com.

Siemens SITRANS FM MAG6000 is a flow transmitter for high accuracy applications and is compatible with SITRANS FM MAG1100/1100F, MAG3100/3100P/3100W, and MAG5100 sensors. It features three outputs: a current output for range, time constant and alarms, plus digital and relay outputs for pulse, frequency, error, and limit settings. The MAG6000 includes all the functionality of the MAG5000, with the addition of integrated batch functions, and plug-and-play bus modules for HART, Foundation Fieldbus, DeviceNet, Modbus RTU/RS-485 and Profibus PA/DP communications.

Like the MAG5000, the MAG6000's local digital interface includes a three-line display and six pushbutton keypad. It can be used for daily operations or for commissioning and service. In setup mode, it provides access to basic flowmeter settings (measuring range, outputs, flow direction, user-defined volume and time units, velocity units, totalizer decimal, low flow and empty pipe cutoffs, and error levels), passwords, the display language, or which functions are accessable to operators. The display's primary reading can be either the flow rate or totalizer value. A HART communications option is available for programming via handheld communicator, or a PC with Siemens SIMATIC PDM.

The transmitter can be mounted directly on the sensor with its front in either direction, to optimize viewing angle of the display and keypad. Add a sun shield accessory if your field transmitter will be in an outdoor area, where direct sunlight could increase the operating temperature and decrease display visibility.

  • Compatible with SITRANS FM MAG1100/1100F, MAG3100/3100P, and MAG5100 sensors
  • Maximum measuring error 0.2% of flow rate ±1 mm/Sec
  • Backlit alphanumeric digital display and local programming keypad
  • Three outputs: 0/4-20 mA current, frequency output, and relay
  • Low flow cutoff 0-9.9% maximum flow
  • Batch control (start, stop, hold/continue) via solid state digital or relay outputs: configurable quantity, time, counter, and time constant
  • HART communications optional for commissioning and service using handheld or SIMATIC PDM
  • Plug-in bus modules for Foundation Fieldbus, DeviceNet, Modbus RTU/RS-485, Profibus PA/DP
  • Rated for operating temperatures -4° to 140° F (-20° to 60° C)
  • IP20/NEMA 1 aluminum rack-mount enclosure with CE, cULus general service approvals
  • IP66/NEMA 4X/NEMA 6 fiberglass-reinforced polyamide and stainless steel enclosure has FM, CSA Class I, Div 2 non-incendive approval for hazardous areas

Supported by

Siemens Advantage Plus

Popular configurations available in limited supply from Siemens Advantage+ stock to help you recover quickly in downtime situations.

Model Selection Guide

Use this table to find the right model for your application. Call a Lesman sales specialist at 800-953-7626 for assistance building your complete model number.

Make one choice from each table section. A complete catalog number will look like this: 7ME6920- _ _ _ _ _ - _ _ _ _.

Description Catalog Number
Mag 6000 Flow Transmitter; Max. Measuring Error: 0.2% Flow Rate ±1 mm/Sec7ME6920-
Design NEMA 4X/6/IP67 Polyamide and Stainless Steel On-Sensor or Remote Mount Transmitter
NEMA 1/IP20 Aluminum and Steel 19" Rack or Wall Mount Transmitter
1AA _ _-
2CA _ _-
Power Supply 115-230 VAC
11-30 VDC/11-24 VAC
_ _ _ 10-
_ _ _ 30-
Display None (Blind Transmitter, Programmed through SENSORPROM)
Integral Display with Local Configuration Panel
0 _ _ _
1 _ _ _
Communications None
HART®
_ AA0
_ BA0
Accessories NEMA 4X Wall-Mount Polyamide Junction Box for Remote Field Mount
Sun Shield for Mag5000/Mag6000 Field-Mount Transmitters
Potting Kit for IP68/NEMA 6P Sealing for Sensor Junction Box
FDK:085U1053
A5E02328485
FDK:085U0220
More Information
HART Yes

To build your complete part number, make a selection from each table section below. Your completed model and its price will appear in the Results section. If you don't see the options you need, call us.

            Results

            Please complete your model selections.
            Write Your Own Review
            You're reviewing:Siemens SITRANS FM MAG6000 Magnetic Flow Transmitter (Accuracy 0.2%)
            Your Rating
            Copyright 1995-2021 © Lesman Instrument Company