Siemens 760 P/E Pneumatic and Electropneumatic Valve Positioners
$750+ Online Orders Ship Free via UPS Ground.
Pneumatic or electropneumatic valve positioner, single- or double-acting output, direct or reverse action. Available blind or with beacon or flat indicator. 150 PSIG supply pressure max. Flow capacity 9 or 18 SCFM with 0.5 ot 1.0 SCFM air consumption. 90° rotary feedback standard, 1/2" to 6" linear feedback. Good for temperatures -40° to 185° F (-40° to 85°C).
Siemens' Series 760 P/E valve positioners provide a cost effective, universal approach to valve control. The basic pneumatic model 760P1 takes a 3-15 PSIG input, and provides split ranging, direct or reverse action, and single or double action without adding any accessories. With the addition of an I/P transducer, the positioner becomes electropneumatic (760E1), to support a 4-20 mA DC input.
The mechanical linkage and characterization cam are field-replaceable to configure the positioner for use with either a linear or rotary actuator. No additional parts are necessary to change between single- or double-acting actuators or direct and reverse action.
- Double- or single-acting output, direct or reverse action, and split ranging for application flexibility
- Non-interaction of zero and span adjustments and positive cam locking mechanism reduce calibration and setup
- Modular design supports interchangeable spare parts and reduces inventory: 4-20 mA feedback, limit switches, NAMUR switches, I/P module, and high flow spool valve all fit inside the enclosure
- Comes standard with three cam characterizations: linear, quick opening, and equal percentage
- Good for temperatures -40° to 185° F (-40° to 85° C); High temperature option available for process temperatures to 300° F (149° C)
- Rotary feedback 90° standard; Linear feedback 1/2" to 6" standard (longer lengths available)
- NACE MR-01-75 compliant material ensures operation in harsh industrial environments
- Available with beacon or flat indicator
- NEMA 4X/IP65 Epoxy and Polyester Powder-Coated Enclosure
- FM, CSA, CE, and ATEX approvals
Model Selection Guide
Use this table to find the right model for your application. Need a sensor for a larger diameter, or an ANSI 300# flange? Call a Lesman sales specialist at 800-953-7626 for assistance building your complete model number.
Make one choice from each table section. A complete catalog number will look like this: 760_ _ _ _ _ _ _ _ _ _.
| Description | Catalog Number | |
|---|---|---|
| Siemens Series 760 Valve PAC™ Valve Control Positioner | ||
| Input Signal | Pneumatic, 3 to 15 PSIG Electropneumatic, 4–20 mA DC |
760P1 760E1 |
| Action (Rising Stem/ Linear or Rotary) |
1/2" to 2" Stroke Lever, Three 60°
Cams 1/2" to 4" Stroke Lever, Three 60° Cams 1/2" to 4" Stroke Lever, One 90° Linear Cam [Note 1] 2" to 6" Stroke Lever, Three 60° Cams 2" to 6" Stroke Lever, One 90° Linear Cam [Note 1] Quarter Turn 1/2" Square Shaft, Three 60° Cams Quarter Turn NAMUR-Style Shaft End, Three 90° Cams |
4 1 E 2 F 3 5 |
| Enclosure Type | Type 4X/IP65, No Indicator, 3/4" NPT
Conduit Connection Type 4X/IP65, 90° Beacon Indicator, 3/4" NPT Conduit Connection Type 4X/IP65, 60° Flat Indicator, 3/4" NPT Conduit Connection Type 4X/IP65, 90° Flat Indicator, 3/4" NPT Conduit Connection |
A B J K |
| Flow Capacity | Standard Capacity Spool Valve Assembly, 9
SCFM, Cv=0.3 High Flow Capacity Spool Valve Assembly, 18 SCFM, Cv=0.6 Low Flow Gain Spool Valve Assembly, 9 SCFM, Cv=0.3 |
A B C |
| Environmental Construction |
Standard Temperature (-40° to 185 ° F) Ozone-Resistant with Viton Dynamic Elastomers and Iso-Elastomeric Spring |
A E |
| Gauges | None Set of Three Gauges |
N G |
| Limit Switches | None Two SPDT Mechanical Switches |
N 1 |
| Feedback Devices | None 4–20 mA DC Feedback |
N 2 |
| Design | Revision Level | D |
| Approval | None FM/CSA/CE/ATEX |
N 6 |
| Accessories | I/P Conversion Module Kit (Converts 760P to 760E) Pressure Gauge Kit (Set of Three) Standard Flow Spool Valve Kit High Flow Spool Valve Kit |
16300-1355 16300-442 16300-468 16300-469 |
Notes
- Action options E and F are subject to increased linearity error. Fix feedback pin in lever to hold non-linearity error to 3% max.
| Is FM | No |
|---|
To build your complete part number, make a selection from each table section below. Your completed model and its price will appear in the Results section. If you don't see the options you need, call us.
Results
| Please complete your model selections. |