Honeywell Kromschroder IFD 258 Automatic Burner Control Units

Prices starting at:
$476.00
Call for Availability
SKU
846214XX

Honeywell Kromschroder's IFD258 automatic burner control units ignite and monitor modulating or stage-controlled direct-ignition gas burners.

Honeywell Kromschroder's IFD258 automatic burner control units ignite and monitor modulating or stage-controlled direct-ignition gas burners. Because of their fully electronic design, they react quickly to process requirements and can be used in  frequent cycling operations.

With the simple local display, you can read program status and the level of the flame signal directly from the unit. You can set the cutoff point using a potentiometer, and switch-select the behavior in the event of flame failure during operation.

  • Compatible with direct ignition burners
  • Operating time: less than 24 hours
  • Signal line length: 75M maximum
  • Immediate fault lock-out or restart following flame failure
  • Safety time on startup (ignition trial time): 3, 5 or 10 second models available
  • Safety time during operation (flame failure response time): 1 or 2 second models available
  • Optional integrated ignition transformer models available
  • Flame controls with UV sensor or ionization sensor
  • UL, CSA, CE, AGA approvals

Model Selection Guide

Use this table to find the right model for your application.  Don't see the option you need? Call a Lesman sales specialist at 800-953-7626

Model CodeSafety Time on Start-upSafety Time During OperationCatalog Number
IFD258 burner control unit, 120VAC power, no integrated ignition transformer
IFD258-3/1Q3 seconds1 secondKS84621410
IFD258-3/2Q3 seconds2 secondsKS84621420
IFD258-5/1Q5 seconds1 secondKS84621430
IFD258-5/2Q5 seconds2 secondsKS84621440
IFD258-10/1Q10 seconds1 secondKS84621450
IFD258-10/2Q10 seconds2 secondsKS84621460
Write Your Own Review
You're reviewing:Honeywell Kromschroder IFD 258 Automatic Burner Control Units
Your Rating
Copyright 1995-2020 © Lesman Instrument Company