Honeywell Kromschroder’s BCU570 burner control unit ignites, controls, and monitors individual industrial burners and forced-draft burners of unlimited capacity for intermittent or continuous operations. It can be used with directly ignited burners or pilot burners.
The BCU570’s interface can control elements for burner capacity control. It can control the system’s actuators (IC20, IC40, three-point step control and RBW), frequency converters, and valve proving system.
You can read system parameters, analysis, and diagnostic information directly on the BCU570 interface. BCSoft software saves the system’s parameters on the integrated parameter chip card. This card can be removed and inserted into a new BCU, if needed.
- Easy-to-replace fan, actuator and valve outputs
- DIN rail mountable
- Safety functions in accordance with EN 746-2 and EN 676, compliant to SIL 3 standards (DIN EN 62061) corresponding to PL e (ISO EN 13849)
- Optional external operator-control unit (OCU), valve proving system, and fieldbus communications module
- AGA approval