Honeywell Analytics Sensepoint XCD Explosion-Proof Transmitter for Hazardous Gas Detection

Honeywell's Sensepoint XCD gas transmitter enables remote detection of combustible, toxic and oxygen hazards. With remote toxic and Oxygen sensor mounting of up to 100 feet (30m) away from the transmitter, Sensepoint XCD provides a robust monitoring solution even in challenging environments where detection is difficult, including applications where the detection point is in an area not easily accessible or where the detector would not be visible, like in high or low level concealed areas or outside a room being monitored.

The XCD's sensor plugs into the bottom of the transmitter and the transmitter automatically configures itself accordingly. If you need to modify detector operation, you'll use the LCD and magnet switches — and never to open the unit. This enables one-man, non-intrusive operation and reduces routine maintenance time and costs. A three-color backlit LCD clearly shows the unit’s status at a glance, even at a distance. A steady green backlight indicates normal operation, flashing yellow indicates fault and flashing red indicates an alarm.

• mV Transmitter supports catalytic bead sensors for flammable gases (20.0 to 100% LEL) and infrared sensors for methane and propane (20.0 to 100% LEL) and carbon dioxide (2% volume)
• EC Transmitter supports electrochemical cell sensors for hydrogen sulfide (10 to 100 ppm), carbon monoxide (100 to 1000 ppm), and hydrogen (1000 ppm)
• O2 transmitter has a 25.0% volume oxygen sensor
• Selectable sink or source 4-20mA output
• Two programmable alarm relay and one programmable fault relay
• RS485, Modbus RTU communication
• Stainless steel or aluminum explosion-proof housing options
• UL, cUL, ATEX, IECEx, CE Approvals

Common Replacement Parts for Honeywell Sensepoint XCD Gas Detection Transmitters

Don't see the part you need? Call us at 800-953-7626. Our factory-trained sales team will be happy to help you find it.