Fireye's Phoenix Integrated Flame scanner is available in two formats: The 85UVF for ultraviolet emissions and the 85IRF for infrared emissions measurement. Both feature a solid state flame detection sensor and an internal relay with automatically set ON/OFF thresholds, so there's no need to buy a remote flame amplifier or flame switch.
The Phoenix 85UVF/IRF incorporates full self-diagnostics and electronic self-checking. Applications in duct burners, industrial gas burners, refinery applications, waste oil units, waste gas units, low NOx burners, and incinerators.
- 4 button keypad plus LEDs for continuous indication of flame signal, flame relay status, scanner status, and selected operation mode
- One analog 4-20mA output of flame strength is standard
- Fiber Optic Cable assemblies available for difficult sighting applications
- NEMA 4X/IP66 enclosure
- Class I, Div 2, Class II, Div II, Class III, Groups A-D approvals, ATEX approved models also available
Model Selection Guide
Use this table to find the right model for your application. Don't see the option you need? Call a Lesman sales specialist at 800-953-7626.
|Self-checking UV flame scanner
Self-checking UV flame scanner, ATEX and CE approved
|1" mounting flange for 85UVF1
1" mounting flange for ATEX-approved 85UVF1
10-foot cable assembly
24VDC power supply