Fireye MicroM Series Flame Safeguard Control System

Prices starting at:
$434.00
Call for Availability
SKU
MicroM

Fireye's MicroM Series flame safeguard control is a compact, microprocessor based, modular burner management system designed to provide automatic ignition and continuous flame monitoring for commercial sizes of heating and process equipment firing any type of fuel.

Fireye’s MicroM series flame safeguard control is a compact, microprocessor based, modular burner management system designed to provide automatic ignition and continuous flame monitoring for commercial sizes of heating and process equipment firing any type of fuel.

Unlike other flame safeguard control systems, the MicroM is not dependent on discrete components to provide timing functions. Through its microcontroller technology, MicroM includes smart diagnostic LEDs, smart reset function for multi-burner applications, and options for a local alphanumeric display output (ED510) and serial communications via Modbus or E500 communications interface.

A complete MicroM system includes a standard chassis and wiring base, a programmer module, plug-in flame amplifier, and a flame detector. Interchangeable programmer and amplifier modules let you change control function, timing, and flame scanning as your application needs change. Type of flame scanner and the flame failure response time (FFRT) are determined by the amplifier module.

  • Automatic ignition and continuous flame monitoring
  • Choose from the following functions: relight, recycle, non-recycle, two-stage capability, non-recycle air flow, proof of air flow open at start, purge timing, early spark termination, pilot proving, and cutoff
  • LED indicators show current operating status and display fault as a coded sequence during lockout
  • Compatible with flame rod (flame rectification), ultraviolet (UV) scanners, and self-checking UV scanners for continuous operation
  • Optional ED510 alphanumeric display and communication interface module

Model Selection Guide

Use this table to find the right model for your application.  Don't see the option you need? Call a Lesman sales specialist at 800-953-7626

DescriptionCatalog NumberAvailability
Step 1: Select a 120 VAC, 50/60 Hz Chassis
Chassis with standard plug-in daughter board MEC120
Chassis with remote resetMEC120R
Chassis with alphanumeric display interface to ED510 MEC120D
Chassis with remote reset and alphanumeric display interface to ED510, interface to E500 communication module, and Modbus capabilityMEC120RD
Step 2: Select a programmer module
Relight function, 10-sec PTFI MEP100
Non-recycle on flame fail, 5-sec PTFI MEP102
Non-recycle on flame fail, 10-sec PTFIMEP104
Non-recycle on flame fail, lockout on air-flow open with flame present, 10-sec PTFIMEP105
Relight operation, 12-sec purge, 10-sec PTFI, reset lockout on line power interruption MEP106
Selectable recycle/non-recycle function, TFI timing, purge timing, post purge, prove open at start, 8-sec pilot stabilization, 10-sec main trial for ignition, run-check switchMEP560
Step 3: Select an amplifier module
UV amplifier, 0.8-sec FFRTMEUV1  
UV amplifier, 3-sec FFRT MEUV4  
UV self-check amplifier, 0.8-sec FFRTMEUVS1  
UV self-check amplifier, 3-sec FFRTMEUVS4  
Flame rectification, 0.8-sec FFRTMERT1  
Flame rectification, 3-sec FFRT MERT4  
Step 4: Select a flame scanner to match your choice of flame amplifier
UV Non self-checking scanner, 3 ft. flexible cable, 1/2" NPT connection UV1A3  
UV Non self-checking scanner, 6 ft. flexible cable, 1/2" NPT connection UV1A6  
Ultraviolet self-checking scanner 120 VAC shutter, 1" NPT connection45UV5-1009  
12" Flame rod for gas flames, 1/2" NPT connection 69ND1-1000K4  
Step 5: Select a wiring base
Surface mount closed wiring base61-3060
Cabinet-mount open wiring base61-5042
Step 6: Add optional functionality as needed
Communication Interface ModuleE500
Write Your Own Review
You're reviewing:Fireye MicroM Series Flame Safeguard Control System
Your Rating
Copyright 1995-2020 © Lesman Instrument Company