Fireye BurnerLogix Burner Management Control System

Fireye’s BurnerLogix is a microprocessor based burner management control system designed for proper burner sequencing, ignition, and flame monitoring protection on automatically ignited oil, gas, and combination fuel burners.

BurnerLogix learns the characteristics of the fuel being burned and sets its internal thresholds to optimize detection under all conditions. And when firing conditions change for the worse, the Adaptive IR system reacts properly and safely shuts the burner down.

BurnerLogix has a smaller footprint then its predecessors. One programmer module can solve most applications' requirements reducing spare parts inventory. Programmer modules are interchangeable, so you can choose function, timing, and flame failure response times, and easily upgrade for changing applications.

• Proof of fuel valve closure during the off cycle
• A run/check switch allows the operator to stop the program sequence in any of four different positions (Purge, PTFI, MTFI or Auto)
• Consistent flame signal read-out via display module or 4-20mA output
• Remembers history and present position even when power in interrupted
• LED shows operating status and lockout information
• Revert to pilot can increase burner turn down
• NEMA 4 remote display
• Pigtail wiring base saves time, labor, and makes it easier to upgrade existing installation
• RS 485 Modbus communications

Model Selection Guide

Use this table to build the right model for your application. Most popular options are shown here.

Don't see the model you need? Call a Lesman sales specialist at 800-953-7626.