Controllers > Hybrid Control Solutions > CAL Controls CALogix

CAL Controls CALogix Modular Logic and Process Control System

CAL Controls' CALogix is a modular loop and logic system that consists of a DIN-rail base unit and up to four control modules. PID and logic modules can be added to the base in any configuration, so you can make it fit the exact requirements of your application. CALogix can be easily integrated within a system that has a central user interface: a CALopix operator panel, or a PC running OPC-based SCADA system or your own custom software.

Key Specifications

  • PID and Logic I/O Control Modules
  • Base Unit Supports Up to Four Control Modules; Network Up to 31 Base Units
  • RS485 Modbus RTU
  • Flexibility to Meet Application Requirements
  • PID Heat/Cool, Autotune, Programmable Profiles, Alarms
  • Temperature or Analog Inputs; Relay, Solid State, or Analog Outputs
  • Function Block Programming for Integrating Logic with PID
  • Boolean, Timer, Counter, and Comparator Functions
  • CALogix-sw Software Configuration Tool and CALopix Operator Panels

Specifications, Manuals, and Supporting Literature

Click the file icon to view the file online, or right-click on the file icon and select "Save Target As..." to download the file to your computer for later viewing.
Tip: If you want to print a large file, download it to your PC first.

    • Lesman Catalog Section on Controllers and Programmers
    • 3.0MB
    • Lesman Catalog Section on Controllers and Programmers
    • CAL Controls CALogix Logic and Process Controller Brochure
    • 765KB
    • CAL Controls CALogix Logic and Process Controller Brochure
    • CAL Controls CALogix HMI 500 Operator Interface Specifications
    • 204KB
    • CAL Controls CALogix HMI 500 Operator Interface Specifications
    • CAL Controls CALogix Logic and Process Controller Installation Instructions
    • 364KB
    • CAL Controls CALogix Logic and Process Controller Installation Instructions
    • CAL Controls CALogix Logic and Process Controller User Manual
    • 1.7MB
    • CAL Controls CALogix Logic and Process Controller User Manual

Model Selection Guide

DescriptionCatalog
Number
CALogix base unit (with CALogix-sw Software)
DIN-Rail Mount Power Supply - 2A, 24 VDC
RS-232 to RS-485 Converter
CALogix Programming Cable
CALgrafix Software for CALogix with OPC
7C00000400
7V02A00000
3C25000K3X
CAB RJ452M01
1008GB000
Input Type Output 1 Output 2 Output 3 4 Inputs Max.
PID Modules
Select Input Type
A= TC/RTD
B= 4-20 mA
C= 0-5 VDC
D= 0-10 VDC
(Replace A as needed)
SSD
Relay
SSD
4-20 mA
4-20 mA
0-5 VDC
0-5 VDC
0-10 VDC
0-10 VDC
Relay
Relay
SSD
Relay
SSD
Relay
SSD
Relay
SSD
Relay
Relay
Relay
Relay
Relay
Relay
Relay
Relay
Relay
7P2110A000
7P1110A000
7P2210A000
7PB110A000
7PB210A000
7PC110A000
7PC210A000
7PD110A000
7PD210A000
Logic Modules
E= 5/12/24 VDC
SSD
Relay
SSD
Relay
Relay
SSD
Relay
Relay
Relay
7L2110E000
7L1110E000
7L2210E000
Blank Module One for each empty slot in base. 097004

Accessories

Call Lesman at 800-953-7626 for operator interface models and accessories.

  • CAL Controls HMI 500 TFT operator interfaces, configuration software, programming and communications cables
  • Base link cable for connecting multiple CALogix bases into a single system
  • CALGrafix Pro controller management software and CALopc Server software for connecting to third-party clients or networks