Controllers > Single Loop PID Controllers > CAL Controls CAL9300

CAL Controls CAL9300 1/16 DIN PID Single Loop Temperature Controller

CAL Controls Model CAL9300 1/16 DIN digital temperature controller with CALComms serial communication system, fits almost any PID control application. A one-shot Autotune algorithm helps automate system startup and maintain good control over a wide range of process conditions.

Key Specifications

  • 1/16 DIN PID Controller with 4-Digit Display
  • 5 Alarm Configurations with Latch and Sequence Feature
  • Ramp/Soak Single Segment Programmer
  • Relay or Solid State Dual Output Device Options
  • CE-Compliant, IP66/NEMA4 Faceplate
  • Compatible with CALComms Communication Software

Specifications, Manuals, and Supporting Literature

Click the file icon to view the file online, or right-click on the file icon and select "Save Target As..." to download the file to your computer for later viewing.
Tip: If you want to print a large file, download it to your PC first.

    • Lesman controllers and programmers catalog PDF
    • 3.0MB
    • Lesman Catalog Section: Controllers and Programmers
    • CAL Controls CAL9300 controller brochure
    • 406KB
    • CAL Controls CAL9300 1/16 DIN Single Loop PID Temperature Controller Brochure
    • CAL Controls CAL3300 and CAL9300 controller operation manual
    • 373KB
    • CAL Controls CAL3300 and CAL9300 Single Loop PID Temperature Controllers User Manual

Model Selection Guide

Use this table to find the right model for your application. Click the model number to order in our secure online store.

DescriptionCatalog
Number
1/16 DIN temperature controller, single line display 93-
100-240 V Power,
No Communications
2 Amp Solid State Driver, 1 Relay
2 Amp Relay, 1 Amp Relay
Two 2 Amp Solid State Drivers
93 0000 000
93 1100 000
93 2200 000
100-240 V Power,
RS-232 Communications
2 Amp Solid State Driver, 1 Relay
2 Amp Relay, 1 Amp Relay
Two 2 Amp Solid State Drivers
93 0000 200
93 1100 200
93 2200 200
100-240 V Power,
RS-485 Communications
2 Amp Solid State Driver, 1 Relay
2 Amp Relay, 1 Amp Relay
Two 2 Amp Solid State Drivers
93 0000 400
93 1100 400
93 2200 400
12-24 V Power,
No Communications
2 Amp Solid State Driver, 1 Relay
Two 2 Amp Solid State Drivers
93 0000 030
93 2200 030
12-24 V Power,
RS-232 Communications
2 Amp Solid State Driver, 1 Relay
Two 2 Amp Solid State Drivers
93 0000 230
93 2200 230
12-24 V Power,
RS-485 Communications
2 Amp Solid State Driver, 1 Relay
Two 2 Amp Solid State Drivers
93 0000 430
93 2200 430

Accessories

Don't forget these CAL controller accessories

  • PCB RS-232 Communications Module [PN 3C0000200]
  • CALComms™ Software and Manual [PN 1001GB300]
  • 1-Ohm Resistor for 4-20 mA Inputs [PN 071110]
  • Quench Arc Snubber for Relay Outputs [PN 070001]
  • CAL Controls 1/4 DIN to 1/16 DIN Panel Adapter [904400]