Kromschroder BCU 370 Burner Control Unit

Kromschroder's BCU 370 burner control unit is designed to control, ignite, and monitor industrial forced draught burners in intermittent or continuous operation. It can be used both for burners that are ignited directly and those that are lit with a pilot burner.

The BCU 370 activates the blower, positions the butterfly valve to the pre-purging and ignition position, monitors gas and air pressure, and checks valves with an external gas pressure switch. The unit can also be programmed by optical interface and BCSoft PC software.

Key Specifications

  • Compatible with pilot burner and direct ignition burners
  • Operating time: more than 24 hours
  • Signal line length: 50M maximum
  • Programmable flame failure response
  • Use with UV or ionization flame sensors
  • EC type-tested and certified, CSA and FM approved

Supporting Documentation
Click the file icon to view the file online, or right-click on the file icon and select "Save Target As..." to download the file to disk for later viewing.

Type Description Size
Lesman Combustion and Flame Safety Solutions Catalog Lesman Combustion and Flame Safety Solutions Catalog 3.7MB
Kromschroder BCU 370 brochure Kromschroder BCU 370 Burner Control Unit Brochure 536KB
Kromschroder BCU 370 user manual Kromschroder BCU 370 Burner Control Unit Technical Specification 4.1MB
Kromschroder BCU 370 operating manual Kromschroder BCU 370 Burner Control Unit Operation Instructions 2.7MB

 
Last Ed. Date: 08/24/2017 04:55 PM