PIECAL 820 Multifunction Universal Process Calibrator (mA, V, T/C, and RTD)

PIECAL's 820 process calibrator functions as multiple devices in one instrument. It is compatible with milliamp, voltage, frequency, thermocouples, as well as RTDs, and calibrates directly in temperature °C and °F.

The PIECAL 820 calibrator can troubleshoot loop and wiring problems with its built-in continuity checker. And it has a built-in 250-ohm resistor, so you can use it to bench-test HART® transmitters.

Key Specifications

  • Source 0-24 mA, 0-10.25 VDC, and 0-80 mV
  • Read to 24 mA, 10.24 or 60.00 V, and 80 mV
  • Works with thermocouples types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN), and P (Platinel II)
  • Source and read frequency to 2000 CPM, 999.00 Hz, 9.9999 kHz, and to 20.000 kHz
  • Simulate two-wire transmitters
  • Built-in 250-ohm resistor for bench-testing HART® instruments

Supporting Documentation
Click the file icon to view the file online, or right-click on the file icon and select "Save Target As..." to download the file to disk for later viewing.

Type Description Size
Lesman Catalog Section: Process Control Accessories Lesman Catalog Section: Process Control Accessories 2.4MB
PIE to Altek calibrator comparison Comparing PIE Calibrators to Altek Models 2.7MB
PIECAL 820 universal multifunction process calibrator specification datasheet PIECAL 820 Universal Multifunction Universal Process Calibrator Specification Datasheet 494KB
PIECAL 820 universal multifunction process calibrator operating instructions PIECAL 820 Universal Multifunction Universal Process Calibrator User Manual 2.1MB

 
Last Ed. Date: 02/08/2017 09:36 AM