PIECAL 334Plus Automated mA Loop Calibrator

Like the PIECAL 334, the 334Plus calibrates signal instruments in a 4 to 20 milliamp DC loop. It can be used at any access point in the loop, and can simultaneously power your two-wire transmitter and measure its output thanks to its internal batteries and internal switching power supply.

The 334Plus features ground current leak detection which locates faulty wiring, flooded conduit, and corrosion bridges for troubleshooting. When powering up your loop, the 334Plus will indicate leakage by pinpointing any current that isn't controlled by the transmitter or other current control element. The PIECAL 334Plus is comparable to Altek's 334 and 334A models.

Key Specifications

  • Source and read from 0 to 24 mA
  • Works with all your current signal instruments in a 4-20 mA DC loop
  • Simulates two-wire transmitter
  • Simultaneously power your two-wire transmitter and measure its output
  • Can measure from -99.99 to 99.99 VDC with 0.01 Volt resolution
  • Features preset 4 mA (0%) and 20 mA (100%)  EZ-CHECK™ settings, or use the adjustable digital potentiometer DIAL to save any value within 0.01 mA

Supporting Documentation
Click the file icon to view the file online, or right-click on the file icon and select "Save Target As..." to download the file to disk for later viewing.

Type Description Size
Lesman Catalog Section: Process Control Accessories Lesman Catalog Section: Process Control Accessories 2.4MB
PIE to Altek calibrator comparison Comparing PIE Calibrators to Altek Models 2.7MB
PIECAL 334 plus automated mA loop calibrator specification datasheet PIECAL 334 Plus Automated mA Loop Calibrator Specification Datasheet 346KB
PIECAL 334 Plus automatedmA loop calibrator operating instructions PIECAL 334 Plus Automated mA Loop Calibrator User Manual 992KB

 
Last Ed. Date: 08/24/2017 04:54 PM