Siemens SIPART PS2 Electropneumatic Valve Positioners

Prices starting at:
$1,468.00

$500+ Orders on Lesman.com Ship Free via UPS Ground

Call for Availability
SKU
6DR5

Smart electropneumatic valve positioner for linear or rotary actuators, single- or double-acting output. Available blind or with local digital display and gauge block. 101.5 PSIG supply pressure max. 0.12" to 5.12" (3 to 130mm) range of stroke for linear actuators, 30° to 100° angle of rotation range for part-turn actuators. Good for temperatures -22° to 176° F (-30° to 80° C).

Click [Buy Now] to build your model or
See quick ship configurations from factory stock.

Territory Restriction: Due to our territory agreement with Siemens, Lesman is the authorized Siemens sales representative in Illinois, Indiana, Wisconsin, Eastern Missouri, Michigan's Upper Peninsula, Paducah KY area, Oregon, Washington, Northern Idaho, Western Montana, Alaska, and Hawaii. If you are outside that area, you can find your local sales office or get technical assistance by calling 800-365-8766 or 972-522-4500, or sending an email to piabusales.industry@siemens.com.

Siemens SIPART PS2 electropneumatic positioner is used to control the final control elements of linear and rotary actuators. With its wide range, and an infinitely adjustable 3- to 130-mm stroke range, SIPART PS2 can be directly integrated to modern actuators without pipe work and without additional overhead. Depending on your application requirements, PS2 can be ordered with 4-20 mA position feedback, three-output alarm module, and limit signaling.

The SIPART PS2 features simple operation, with local manual configuration using three pushbuttons and a user-friendly two-line display. Models with HART communications can also be commissioned and monitored using SIMATIC PDM software. It features extensive diagnostics for both the valve and actuator, including full stroke test, step response and multi-step response tests, and valve performance tests.

  • 0.12" to 5.12" (3 to 130mm) range of stroke for linear actuators, 30° to 100° angle of rotation range for part-turn actuators
  • Mountable in any position (pneumatic connections/exhaust not facing up in wet environments)
  • Automatic commissioning (self-adjustment of zero and span)
  • For operating environments -22° to 176° F (-30° to 80° C)
  • Maximum air consumption in controlled state: <0.036 Nm3/h
  • Can be operated with compressed air, carbon dioxide, nitrogen, noble gases, or cleaned natural gas
  • Required air quality per ISO 8573-1: Class 3 solid particulate size and density, pressure dewpoint, and oil content
  • 0/4-20 mA analog output signal
  • HART, Profibus PA, Foundation Fieldbus communications available
  • NEMA 4X/IP66 reinforced polycarbonate enclosure standard; aluminum and stainless steel enclosures optional
  • SIL 2 Functional Safety compliant to IEC 61508 or IEC 61511 for safe venting
  • FM, CSA, ATEX, IECex approvals

Supported by

Siemens Advantage Plus

 

Need technical help?
Visit the Siemens USA Support center.

Popular configurations available in limited supply from Siemens stock to help you recover quickly in downtime situations.

Quick Ship from Factory Stock

DescriptionClick to Buy Now
SIPART PS2 smart electropneumatic positioner for pneumatic linear and part-turn actuators: 2-,3-,4-wire; 4 to 20mA with HART-interface; 1/2" NPT electric connection, 1/4" NPT pneumatic connection
Single acting; Aluminum Enclosure; FM Explosion Protection, Non-Sparking, Intrinsic Safety; Standard/Fail-Safe version: Depressurizing the actuator in case of failure of electrical auxiliary power.6DR5213-0FN00-0AA0
Double acting; Aluminum Enclosure; FM Explosion Protection, Non-Sparking, Intrinsic Safety; Standard/Fail-Safe version: Depressurizing the actuator in case of failure of electrical auxiliary power.6DR5223-0FN00-0AA0
Double acting; Aluminum Flameproof Enclosure; ATEX/IECEx/FM/CSA Explosion Protection, Intrinsic Safety; Electronic limit alarm monitor; 4-10 mA position feedback module; Steel gauges for double-acting positioners (Aluminum block, 1/4" NPT). 6DR5225-0EN11-0AA9 R2B
Accessories
Single-action gauge block for PS2 and PS100 Actuators6DR4004-1PN
Double-action gauge block for PS2 and PS100 Actuators 6DR4004-2PN
Plug-in analog output module: position feedback, signal current 4-20 mA, simple to retrofit, with ATEX/IECEx and FM/CSA explosion protection 6DR4004-6J
Mounting kit, stainless steel coupling, without mounting consoleTGX:16300-1556

Model Selection Guide

Use this table to find the right model for your application. Need a different enclosure material? Call a Lesman sales specialist at 800-953-7626 for assistance building your complete model number.

Make one choice from each table section. A complete catalog number will look like this: 6DR5_ _ _-0_ N _ _-0AA _.

Description Catalog Number Availability
SIPART PS2 Electropneumatic/Digital Positioner for Pneumatic Linear and Part Turn Actuators
Input 4-20 mA, Two-Wire
4-20 mA, Two-Wire with HART®  [Note 1]
4-20 mA, Two-/Three-/Four-Wire with HART
6DR50_ _-
6DR51_ _-
6DR52_ _-

 
 
 

 
 
 
Actuator
Action
Single Acting
Double Acting
_ _ _ _ _1_-
_ _ _ _ _2_-



Enclosure Polycarbonate Housing
Aluminum Housing
_ _ _ _ _ _0-
_ _ _ _ _ _3-



Safety Rating
[Note 1]
No Explosion Protection
ATEX/IECEx/FM/CSA Explosion Protection, Intrinsic Safety
FM Explosion Protection, Non-Sparking, Intrinsic Safety
0N _ _ _-
0E _ _ _-
0F _ _ _-



 
 


Connection 1/2" NPT Electrical, 1/4" NPT Pneumatic _ _ N _ _-
Limit Switch No Limit Monitor
Solid State Limit Alarm Module
Mechanical Limit Switch Module
_ _ _ 0 _
_ _ _ 1 _
_ _ _ 3 _






Option Module None
4-20 mA Position Feedback
_ _ _ _0
_ _ _ _1



Options None
Gauge Options (Add R-Code Below)
0AA0
0AA9



Gauge Block Steel Gauges, Aluminum Block, 1/4" NPT, for Single Acting Positioners 
Steel Gauges, Aluminum Block, 1/4" NPT, for Double Acting Positioners 
+R1B
+R2B



Accessories NAMUR Mounting Kit for 2-35 mm Linear Actuators (IEC 534)
NAMUR Mounting Kit for Part Turn Actuators (VDI/VDE 3845)
Siemens ProComSol Isolated USB to HART Modem
6DR4004-8V
6DR4004-8D
HM-USB-ISO






Notes

  1. 6DR51 models only have explosion proof ratings when ordered with an explosion proof housing. Call for current pricing and lead time.

More Information
HART Yes
SIL-Rated Yes

To build your complete part number, make a selection from each table section below. Your completed model and its price will appear in the Results section. If you don't see the options you need, call us.

                  Results

                  Please complete your model selections.
                  Copyright 1995-2023 © Kele Industrial Automation (Lesman and A-Tech Inc)